How To Restart A Gas Water Heater. To access the reset button, you may have to remove the metal plate covering the thermostat that’s held in place by screws. The water heater reset button is the red button located on the water heater itself (just above the thermostat).
Turn the gas control knob or switch back into. The water heater's gas valve is located near the bottom of the unit and connects to your home's natural gas line. The water heater reset button is the red button located on the water heater itself (just above the thermostat).
Then Plugin And Turn It On.
Thermostats aren’t the only parts on an electric water heater that can wear out and trip the reset button, especially if you’re finding you have to reset the water heater frequently or you run out of hot water fast and often. This switch breaks the circuit and saves the water heater from abnormal conditions. Use a mirror to observe the pilot flame.
To Access The Reset Button, You May Have To Remove The Metal Plate Covering The Thermostat That's Held In Place By Screws.
How do you reset the gas valve on a water heater? Before diving into how to reset hot water heater, we should. To access the reset button, you may have to remove the metal plate covering the thermostat that’s held in place by screws.
Keeping This In View, Where Is Reset Button On.
Other reasons for a hot water heater reset button to trip. Typically, this will be under the gas valve. The steps are different for honeywell one.
Next, Hold Two Temperature Buttons Together.
How do i reset my dux gas water heater? It is most likely a foam pad that covers up the reset button as well as other controls present in your water heater. If the gas was shut down on purpose such as for the winter it is very, very safe to go to your manual for your furnace and water heater and turn on the switch, relight the pilot and turn on your thermostat.
Usually, The Thermostat And The High Limit Switch Are Fixed Together And Placed In The Water Heater.
Remember to put the insulation pad aside as you will need to put it back when reassembling. Locate the gas switch or control knob and move it to the off position. If playback doesn't begin shortly, try restarting your device.